VESAWhat is the standard？Ultimate guide for wall mounted and bracket installation of monitors (2025)
VESA The installation standard specifies the dimensions of the four fixing holes on the back of the monitor and the screw models suitable for these mounting holes。 It also specifies the layout style of hole patterns on the display。 To install the monitor to VESA On the bracket，It is best to position the fixing hole at the center of the back of the monitor。 The fixed hole is located at the center position，Minimize the stress on the bracket to the greatest extent possible，So as to increase the load-bearing capacity。
OKD Provide a range of monitor standsproduct，All product designs are compatible withVESA Installation interface standard (FDMI，also calledMIS）The monitor。 When choosing a monitor，Please pay attention to whether the product is compatible VESA standard，In order to smoothly fix it to OKD Monitor wall bracket、On desktop support arms or computer carts。
VESA Specifications
VESAstandard | Screw hole spacing（longxwide）(mm) | screw size | Applicable screen size | Maximum load capacity |
MIS-B | 20×50 | M4 x 6 mm | ≥ 4inch | 2 kg |
MIS-C | 35×75 | M4 x 8 mm | ≥ 8inch | 4.5 kg |
MIS-D 75mm | 75×75★ | M4 x 10 mm | ≥ 12inch | 8 kg |
MIS-D | 100×100★ | M4 x 10 mm | ≥ 12inch | 14 kg |
MIS-E | 100×200 | M4 x 10 mm | ≥ 23inch | 22.7 kg |
MIS F M6 | 200×200 | M6 x 8 mmor 10 mm | ≥ 31inch | 50 kg |
200x200above | M6 x 8 mmor 10 mm | |||
MIS F M8 | 200×200 | M8 x 15 mm | ≥ 31inch | 113.6 kg |
200x200above | M8 x 15 mm |
choice VESA When using the bracket，Hole type and monitor weightIt is the main standard for determining compatibility。 Only when space is limited，Only then will screen size be considered as a factor to consider。 The above table reflects the requirements for display manufacturers VESA guide，But some models may differ from the standard。
Translate into English Apple Monitor fixed to VESA On the bracket
most Apple The monitor is not compatible VESA standard。 To remove non VESA standard Apple Monitor fixed to VESA On the bracket，May require the use of an adapter bracket。 Apple Provide built-in VESA The interface iMac computer。 but，2012 Most of the year-end to present iMac Models cannot be upgraded or added VESA interface，built-in VESA The interface is only provided at the time of purchase。 if Apple not provided VESA adapter，Customized adapter brackets provided by third-party manufacturers can be used。 Apple New accessories：Apple iMac Pro Already provided VESA Interface accessories，Can fix the computer to VESA On the bracket。
